|
Timefactors Straps
Time Factors Velcro Strap |
These straps were generously supplied free of charge by my strap manufacturer to be sold for charity. 100% of the proceeds from the sale of this strap will be donated to the TZ-UK charity Fundraiser.
Specification
- Heavy duty black and grey nylon and Velcro
- Black stitching with stitched orange triangles
- 1.5mm thick
- Overall length is 250mm. When the Velcro fastener is folded back throught the buckle, the strap will fit up to a 9" / 23cm wrist
- The thinner strap onto which the watch fits is 20mm but will also work well with 22mm
Gallery
Product ref: Time Factors Velcro Strap- £10.00 |
In Stock |
|
|
NEW 2-PIECE NYLON WITH DEPLOYANT CLASP |
This new range of 2-piece nylon straps on a bead-blasted deployant clasp has been introduced following significant customer demand. Until popularity is known, they are available in 20mm only.
Manufactured from the same high-quality nylon used for the Time Factors NATO straps, the straps are constructed from 2 layers of 1.2mm thick nylon, stitched together to give a thickness of 2.4mm and fitted with a nylon keeper. With no nylon at the back of the watch, this allows the watch to sit lower on the wrist.
Length of clasp side = 80mm
Length of hole side = 135mm
The strap will fit up to a 9.5 inch (24cm) wrist
*Please be aware that nylon can stretch and also shrink so all measurements are +/- 5mm for length and +/- 1mm for width.
Gallery
Product ref: NEW 2-PIECE NYLON ON DEPLOYANT CLASP |
In Stock |
|
|
Time Factors Stainless Steel Fishtail Buckle 22mm |
I'm regularly asked for buckles for my straps so I've decided to test the water with this one.
It's been created using the same mould that was used for the bronze buckle on the PRS-30 and will fit straps which are 22mm at the buckle end. The straps should have the larger holes to take a 4mm flat tang. Many customers who ordered the PRS-30 have asked for a shorter strap, which is now on order: this buckle will fit those straps.
32mm at the widest point, 24mm back to front and 22mm screwed bar fitting.
Gallery
Product ref: Time Factors Stainless Steel Fishtail Buckle 22mm- £10.00 |
In Stock |
|
|
Time Factors Hand-Stitched Leather 24mm |
This was made for all the people who wanted a shorter strap for the Precista PRS-30 (Bronze watch) although as can be seen from the pictures below, it's a good fit for the PRS-20 "Italian".
Specification
- Genuine leather, extremely soft and supple
- White contrast stitching
- 4.5mm thick
- Buckle side is 75mm long and the "hole" side is 125mm (+/- 2mm)
- Available in 24mm only, black and brown
- Supplied without buckle, the buckle above fits this strap (and the bronze buckle supplied with the PRS-30)
- "Precista" and "Genuine Leather " stamped on the underside of the strap
Gallery
Product ref: Time Factors Hand-Stitched Leather - £18.00 |
In Stock |
|
|
Time Factors Bund Strap |
Manufactured exclusively for Time Factors by the manufacturers of the "Aviator" and "Rally" straps.
Specification
- Genuine leather with nubuck backing
- Self coloured stitching
- 2.75mm thick
- Buckle side is 62mm long and the "hole" side is 125mm*
- Available in 19, 20& 22mm; 19 & 20mm straps are fitted with a 18mm buckle, 22mm with a 20mm buckle. Black and brown available in all sizes
- The backing pad measures 78mm x 44mm on the 19 & 20mm straps, 85mm x 54mm on the 22mm*
- The 19mm strap only is of the open-ended type for fitting to watches with fixed bars and secured with fold-over metal tabs
- Brushed stainless steel buckle
- "Timefactors" and "Genuine Leather " stamped on the underside of the backing pad
- Rated "showerproof"
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Gallery
Product ref: Time Factors Bund Strap- £14.00 |
In Stock |
|
|
Time Factors Calf Leather Ostrich Grain |
This is the identical strap which was supplied on the PRS-20 "Italian" Limited Edition but with plain buckle instead of signed.
Specification
- Calf leather with ostrich grain pattern on nubuck backing
- Rice coloured contrast stitching
- 2.75mm thick
- Buckle side is 80mm long and the "hole" side is 120mm*
- Available in 20, 22 & 24mm; 20 & 22mm straps are parallel, 24mm tapers to 22mm at the buckle
- Polished stainless steel buckle
- "Timefactors" and "Genuine Leather " stamped on the underside of the strap
- Rated "showerproof"
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Gallery
Product ref: Time Factors Ostrich Grain Strap - £14.00 |
In Stock |
|
|
Time Factors CANVAS Strap 18, 20 & 22mm |
Introduced following strong demand from customers for an alternative to leather.
Specification
- 100% natural cotton construction with two fixed keepers and reinforced holes
- Brushed stainless steel buckle
- The buckle side is 75mm and the "hole" side is 115mm so depending on the size of the watch head, will fit a 8 - 8.5 inch (200 - 210mm) wrist*
- Available in Navy Blue, Parachute Regiment Red and Sand colours in 18, 20 and 22mm
Features
- Lightweight
- Comfortable
- Washable
- Hypo-allergenic
- Suitable for Vegans
- Biodegradable
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
18mm & 22mm olive out of stock
20mm sand out of stock
Gallery
Time Factors CANVAS Strap - £5.00 |
Discontinued |
|
|
Time Factors Open-Ended "Aviator" Strap |
After two years of disappointment and unrealistic price quotations, I finally found a manufacturer who would make this quality flieger-style strap without breaking the bank. Make no mistake, the quality of this strap is equal to straps costing double the price or more.
Open-ended to fit the older aviator watches with fixed bars, will also fit watches with screwed bars and regular springbars. The 18 & 20mm are fitted with one screw each side and the 22 & 24mm have two screws each side. The screws are solid 316 stainless steel, not plated base metal
Specification
- Cut edge open-ended construction, secured by domed screws as illustrated
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 18, 20, 22 & 24mm black and brown
- Brushed stainless steel buckle
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
All straps taper 2mm to the buckle, i.e. 24 > 22mm, 22 > 20mm, 20 > 18mm & 18 > 16mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Gallery
Product ref: Time Factors "Aviator" Open-Ended Leather Strap - £12.50 |
In Stock |
|
|
Time Factors "Aviator" Open-Ended "Special" 24mm |
Exactly the same construction as the Aviator parallel straps listed below but not manufactured to specification inasmuch as they should have been 24mm parallel with two screws each side and fishtail buckle. Somewhere in the manufacturing process they mixed the specification for the 24mm parallel and the 20mm open-ended which I ordered at the same time. They are in no way sub-standard or defective, just not what they should have been. I negotiated a reduction in price because they aren't to specification so grab youself a bargain while stocks last.
Available in 24mm brown only at £10 each or buy TWO for £18.
Gallery
Product ref: Time Factors AVIATOR O/E "SPECIAL" - £10.00 |
Limited number in stock |
|
|
Time Factors "Aviator" Parallel Strap with Fishtail Buckle |
Exactly the same general construction as the Aviator open-ended above but a parallel strap fitted with large "fishtail" buckle.
Specification
- Cut edge, closed-end construction
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 20, 22 & 24mm black and brown
- Brushed stainless steel fishtail buckle and 3mm wide tang
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
Single screw in the 20mm and two screws in the 22 & 24mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Gallery
Product ref: Time Factors "Aviator" Leather Strap - £14.00 |
In Stock |
|
|
Time Factors "Aviator" Strap |
Exactly the same general construction as the Aviator open-ended above but with closed end and no screws. This strap is more in the style of the Hirsch Liberty.
Specification
- Cut edge, closed-end construction
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 18, 20, 22 & 24mm black and brown
- Brushed stainless steel buckle
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
All straps taper 2mm to the buckle, i.e. 24 > 22mm, 22 > 20mm, 20 > 18mm & 18 > 16mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
2 August 2016: 20mm black out of stock.
Gallery
Product ref: Time Factors "Aviator" Leather Strap - £12.00 |
In Stock |
|
|
Time Factors Carbon Strap |
Following the demise of the Hirsch Carbon, I had these made to satisfy the constant stream of enquiries for a padded carbon with contrast stitching.
Specification
- Remborde construction
- Leather with carbon pattern on synthetic coating and rubber backing
- Rice coloured contrast stitching
- Padded - 4.5mm thick at the lugs and 2.25mm at the end
- Buckle side is 85mm long and the "hole" side is 125mm (will fit up to a 9 inch wrist)*
- Available in 18, 20 & 22mm; all straps taper 2mm from the lugs to the buckle
- Brushed stainless steel buckle
- "Timefactors" and "Tropical" stamped on the underside of the strap
- Rated "showerproof"
20 & 22mm out of stock. The manufacturer has changed the type of "carbon" used and this new finish is not acceptable. 18mm is still the old stock.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Gallery
Product ref: Time Factors Carbon Strap - £9.00 |
Discontinued |
|
|
Time Factors "Rally" Strap |
I've probably had more requests for this style of strap than any other.
Specification
- Remborde construction
- Leather with leather backing
- Rice coloured contrast stitching
- Buckle side is 75mm long and the "hole" side is 125mm (will fit up to a 9 inch wrist)*
- Available in 18 & 20mm; both straps taper 2mm from the lugs to the buckle
- Brushed stainless steel buckle
- "Timefactors" stamped on the underside of the strap
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
20mm brown out of stock.
Gallery
Product ref: Time Factors Rally Strap - £9.00 |
In Stock |
|
|
|
